上海交通大学机械制造及其自动化导师介绍：倪军

    　　
    倪军
　　教授
　　制造技术与装备自动化研究所
    办公电话 021- 34206765
　　通讯地址 上海交大机械与动力工程学院
　　电子邮件 junni@umich.edu
　　
　　►教育背景
　　1987 Univ. of Wisconsin-Madison Mechanical Eng    博士
　　1984 Univ. of Wisconsin-Madison Mechanical Eng    硕士
　　1982 Shanghai Jiao Tong University Mechanical Eng 学士

　　►工作经历
　　1997.09 - 至今，美国密西根大学机械工程系教授
　　1993.01－1997.08，美国密西根大学机械工程系副教授
　　1989.09－1992.12，美国密西根大学机械工程系助理研究员
　　1987.09－1989.08，美国密西根大学机械工程系博士后
　
　　►研究方向
　　Advanced Manufacturing Technology

　　►科研项目
　　1.“High Definition Metrology and Processes – 2 micron manufacturing,” NIST-ATP, $3,600,000, 11/1/2007-10/31/2010, PI from UM (PI: Ni, co-PIs: Hu, Shih, and Islami)
　　2. “Advanced Manufacturing Process Modeling and Tooling Optimization,” General Electrical Aircraft Engines, $1,250,000, 5/1/05-4/30/2010
　　3.“Rapid, Ultra Precision Direct Metal Deposition Technology,” NIST-ATP, amount: $5,000,000, 6/1/2004 – 5/31/08, PI from UM
　　4.“Engineering Research Center for Reconfigurable Manufacturing Systems,” National Science Foundation (EEC-9529125), $3,600,000, 4/1/05-3/31/06 (PI: Koren, Co-PI: Ni)
　　5.“Fundamental Aspects of Micro Internal Combustion Swing Engine (MICSE) Portable Power Generation Systems,” DARPA, $600,000, 9/1/04-8/31/06
　　6.“Fuel Processors for PEM Fuel Cells,” US Department of Energy, $5,598,478, 1/1/02-12/31/05, (Co-Pis: L. Thompson, E. Gulari, J. Ni, J. Schwank, R. Yang)
　　7.“Micro Internal Combustion Swing Engine (MICSE) System for Portable Power” DARPA/DSO, $3,337,054, 5/1/01-6/30/2004, (Co-PIs:  W. Dahm and J. Ni
　　8.“Development of Virtual Machine Tool Systems,” National Science Foundation (DMI-0004237),   $450,000, 9/1/00 – 8/31/03, PI
　　9.“Presidential Faculty Fellows Awards,” National Science Foundation, $500,000, 10/1/94 - 9/30/01, Principal Investigator
　　10.“Real-Time High-Speed Active Balancing,” NIST-Advanced Technology Programs, $1,984,113 Principal Investigator, 11/1/97 - 10/31/2000
　　11.“Agile and Precision Sheet Metal Stamping,” Advanced Technology Program, National Institute of Standards and Technology (NIST), $8,301,000, 11/1/95 - 6/30/00 (UM’s share is around $4 million), Co-PIs from UM: J. Shi, J. Ni, J. Hu, A. Ghosh, and X. Wu
　　12.“Advanced Compensation System for Quasi-static and Cutting Force-induced Errors for Turning Centers,” Defense Advanced Research Projects Agency (DARPA), $997,620, 7/1/94 - 11/30/96, Principal Investigator
　　13."Variation reduction in automotive assembly and stamping processes," Chrysler Corporation, $940,000, 1/1/93/ - 12/31/96, Co-PIs:  J. Ni, and J. Hu
　　14."Development of an Adaptive Compensation Technique for Enhancing CMM Accuracy," Advanced Technology Program, National Institute of Standards and Technology (NIST), $993,609, 3/1/93 - 2/28/95, Principal Investigator
　　15."Development of Advanced Technologies and Systems for Controlling Dimensional Variation in Automobile Body Manufacturing – 2 mm Program," Advanced Technology Program, National Institute of Standards and Technology (NIST), $13,867,872, (UM’s share was around $6 million) 9/1/92 - 8/30/95, Co-PIs:  S. M. Wu, J. Ni, and J. Hu
　　16."Development of a Modular Thermal Error Sensing and Compensation System on Machining Centers", U.S. Air Force Manufacturing Technology Program and NIST, $499,067, 11/1/91 - 10/30/93, Co-PIs: S.M. Wu, J. Ni
　　17.国家自然科学基金重大国际合作研究项目“燃料电池微细制造的基础理论和关键技术研究” （2008-2010年），外方负责人。
　　18.国家外国专家局、教育部高等学校学科创新引智基地“汽车数字化设计与制造”（编号B06012)，外方负责人，学术大师。

　　►代表性论文专著
　　1.J. Tao, A. J. Shih, J. Ni, 2008, “Experimental Study of the Dry and Near-Dry Electrical Discharge Milling Processes,” ASME Journal of Manufacturing Science and Engineering, Vol. 130(1), pp. 1-9
　　2.Z. Huang, A.J. Shih, and J. Ni, 2007, “Laser Interferometry Hologram Registration for Three-Dimensional Precision Measurements,” ASME Journal of Manufacturing Science and Engineering, Vol. 128, pp. 1006-1013.
　　3.H. S. Kim, M. Koc, and J. Ni, 2007, “A hybrid multi-fidelity approach to the optimal design of warm forming process using a knowledge-based artificial neural network”, International Journal of Machine Tools and Manufacture, Vol. 47, No. 2, pp. 211-222
　　4.Kim, G.Y. Koc, M., Mayor, R., and Ni, J., 2007,"Modeling of the Semi-solid Material Behavior and Analysis of Micro/meso-scale Feature Forming", ASME Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp.237-245
　　5.Z. Yang, Q. Chang, D. Djurdjanovic, J. Ni, and J. Lee, 2007, “Maintenance Priority Assignment using On-line Production Information,” ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp.435-446
　　6.H. Choi, M. Koc, and J. Ni, 2007, “A Study on the Analytical Modeling for Warm Hydro-mechanical Deep Drawing of Lightweight Materials,” in International Journal of Machine Tools and Manufacture, Vol 47, No.11, pp. 1752-1766
　　7.Q. Chang, J. Ni, P. Bandyopadhyay, S. Biller, G. Xiao, 2007, “Maintenance Staffing Management,” Journal of Intelligent Manufacturing, Vol 18, pp. 351-360.
　　8.Z. Yang, D. Djurdjanovic, and J. Ni, 2007, “Maintenance Scheduling in Manufacturing Systems Based on Predicted Machine Degradation,” Journal of Intelligent Manufacturing, Vol. 19, pp.87-98
　　9.J. Liu, D. Djurdjanovic, J. Ni, N. Casoettto, and J. Lee, 2007, “Similarity Based Method for Manufacturing Process Performance Prediction and Diagnosis,” Computers in Industry, Vol. 58 (6), pp.558-566
　　10.Y. Lei, D. Djurdjanovic, J. Ni, J. Lee, G. Xiao, and J. R. Mayor, 2006, “System Level Optimization of Predictive Maintenance in Industrial Automation Systems,” Transaction of NAMRI/SME, Vol. 34, pp.79-86
　　11.H. S. Kim, M. Koc, J. Ni, and A. Ghosh, 2006, “Finite Element Modeling and Analysis for Warm Forming of Aluminum Alloys – Validation Through Comparisons with Experiments and Determination of a Failure Criterion,” ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 128, No.3, pp. 613-621
　　12.D. Djurdjanovic and J. Ni, 2006, “Stream of Variation (SOV) Based Measurement Scheme Analysis in Multi-Station Machining Systems,” IEEE Transactions on Automation Science and Engineering, Vol. 3, No.4, pp. 407-422 (13)
　　13.Zhenhua Huang, Albert Shih and Jun Ni, 2006, “Phase Unwrapping for Large Depth-of-field 3D Laser Holographic Interferometry Measurement of Laterally Discontinuous Surfaces,” Measurement Science and Technology. Vol. 17, pp. 3110-3119
　　14.Feng Ke, Jun Ni, and David Stephenson, 2006, “Chip-Thickening in Deep-Hole Drilling,” International Journal of Machine Tools and Manufacturing, Vol. 46, No. 12-13, pp. 1500-1507
　　15.J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, 2006, “Intelligent Prognostics Tools and E-Maintenance,” Computers in Industry, Special Issue on e-Maintenance, Vol. 57, No. 6, pp.476-489, August
　　16.H. Yang, and J. Ni, 2005, “Adaptive model estimation of machine-tool thermal errors based on recursive dynamic modeling strategy,” International Journal of Machine Tools and Manufacturing, Vol. 45, pp. 1-11
　　17.G.Y. Kim, R. Mayor, and J. Ni, 2005, “Parametric Study of Microreator Design for Water Gas Shift Reactor using an integrated reaction and heat exchange model,” Chemical Engineering Journal, Vol. 110, pp. 1-10
　　18.S. W. Lee, R. Mayor, and J. Ni, 2005, “Development of a Six-Degree-of-Freedom Geometric Error Measurement System for a Meso-Scale Machine Tool,” ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 127, pp.857-865
　　19.J. Lee, J. Ni, D. Djurdjanovic, H. Qiu, and H. Liao, 2005, “Intelligent Prognostics Tools and E-Maintenance,” Computers in Industry, Vol. 57, pp. 476-489
　　20.H. Chen, R. Mayor, and J. Ni, 2004, “Automated Structural Configuration Generation and Kinematic Error Analysis for Meso-Scale Machine Tools,” Transaction of NAMRI, Vol. 32, pp.327-334
　　21.Dragan Djurdjanovic and Jun Ni, 2004, “Measurement Scheme Synthesis in Multi-Station Machining Systems” ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp.178-189 (11)
　　22.S. Zhou, K. Shin, S. Dyer, J. Shi, and J. Ni, 2004, “Extended Influence Coefficient Methods for Rotor Active Balancing during Acceleration,” ASME Transaction, Journal of Dynamics Systems, Measurement and Control, Vol. 126, pp. 219-223
　　23.Yizhu Zhang, Jiangqi Zhou, Zhongqing Lin, and Jun Ni, 2003, “Automatic process planning and subassembly detection for auto-body assembly,” Journal of Computer-Aided Design and Computer Graphics, Vol. 15(6), pp. 680-684
　　24.K. Shin and J. Ni, 2003, "Adaptive Control of Multi-Plane Active Balancing Systems for Speed-Varying Rotors," ASME J. of Dyn. Sys. Measurement and Control, Vol. 125, pp. 372-281
　　25.Dragan Djurdjanovic, Jay Lee, and Jun Ni, 2003,”Watchdog Agent—an infotronics-based prognostics approach for product performance degradation assessment and prediction,” Advanced Engineering Informatics, Vol. 17, pp. 109-125 (27)
　　26.Dragan Djurdjanovic and Jun Ni, 2003, “Bayesian Approach to Measurement Scheme Analysis in Multi-Station Machining System,” Journal of Engineering Manufacturing, Vol., No. B8, pp. 1117-1130 (2)
　　27.B. Zhang, and J. Ni, 2001, “Relative Probability Index Crp – An Alternative Process Capability Index,” Quality Engineering, Vol. 14(2), pp.265-276
　　28.C. Gong, J. Yuan, and J. Ni, 2000, “A Self-calibration Method for Robotic Measurement System,” ASME ASME Transaction, Journal of Manufacturing Science and Engineering, Vol. 122, No. 1, pp 174-181 (16)
　　29)A. Khan, D. Ceglarek, J. Shi, J. Ni, and T. C. Woo, 1999, "Sensor Optimization for Fault Diagnosis in Single Fixture Systems: A Methodology," ASME Transactions, Journal of Manufacturing Science and Engineering, Vol.121, No.1, pp. 109-117 (17)
　　30)J. Yuan and J. Ni, 1998, “The Real-Time Error Compensation Technique for CNC Machining Systems.” Journal of Mechatronics, Vol. 8, No. 3. pp. 359-380. (42)
　　31)J. C. Liang, H. F. Li, J. X. Yuan, and J. Ni, 1997, “A Comprehensive Error Compensation System for Correcting Geometric, Thermal, and Cutting Force-Induced Errors,” The International Journal of Advanced Manufacturing Technology, Vol. 13, pp. 708-712 (2)
　　32)E. Lu, J. Ni, and S.M. Wu, 1996, "An Integrated Lattice Filter Adaptive Control System for Time-Varying CMM Structural Vibration Control, Part I: Theory and Simulation", ASME Transaction, Journal of Engineering for Industry, Vol. 118, No.1, p 67-76, and also presented at 1992 ASME WAM (1)
　　33)P.S. Huang, and J. Ni, 1995, "On-line error compensation of coordinate measuring machines", International Journal of Machine Tools and Manufacture, Vol. 35, No. 5 , pp. 725-738.
　　34)Y.D. Chen, X.J. Tang, J. Ni, and S.M. Wu, 1994, "Automatic Digitization of Free-Form Curve by Coordinate Measuring Machines", International Journal of Production Research, Vol. 32, No. 11, pp.2603-2612, also in Proceedings of ASME WAM, Anaheim, CA 1992 (5)
　　35)J. Ni and S.M.Wu, 1993, "An On-Line Measurement Technique for Machine Volumetric Error Compensation", ASME Transaction, Journal of Engineering for Industry, Feb., Vol. 115, No.1, pp.85-92 (6)
　　36)J.S. Chen, J.X. Yuan, J. Ni and S.M. Wu, 1992, "Compensation of Non-rigid Body Kinematic Effect on a Machining Center", Transaction of NAMRI, Vol. 20, pp.325-329
　　37)H. Zhang, J. Ni and S.M. Wu, 1990, "Simulation Study of An Improved Scheme for Forecasting Compensatory Control", Transaction of NAMRI , Vol. 18, pp.329-333
　　38)F. Shen, J. Ni and S.M. Wu, 1989, "Design and Implementation of a Modular Multi-Processor System for Machine Monitoring and Diagnostics", Transaction of NAMRI , Vol. 17, pp.319-324

　　►软件版权登记及专利
　　1)"Multi-Degree-of-Freedom Geometric Error Measurement System," (with co-inventor:  P. S. Huang),  US Patent Number: 5,418,611, (Filed June 14, 1993), Date of Patent: May 23, 1995
　　2)“A Novel Machining Chatter Prevention Technique Through Random Multi-Level Spindle Speed Variation,” (with co-inventors: Alpay Yilmaz, and Emad Al-Regib), disclosure filed, 4/1996
　　3)“A Roll Measurement Principle and System,” (with co-inventor: Jian He), disclosure filed, 4/1996

　　►学术兼职
　　2003-2004, 美国机械工程学会，制造工程分会，主席
　　2000.9 – 2005.8 美国机械工程学会，制造工程分会执行委员会委员
　　1997.7 – 2000.6，美国机械工程学会制造技术组技术规划委员会委员
　　1994 – 2003，《制造系统》杂志副主编
　　1995 – 1999，2003 – 至今，机械工业部，中国机械科学研究院客座研究员
　　1994 – 1997，华中科技大学客座教授
　　1995 -1998，2004 –至今，台湾工业技术研究院机械工业研究实验室顾问委员会委员
　　1998 – 2001，2003 – 2006 ，清华大学客座教授
　　1999 – 2002，大连理工大学客座教授
　　2000 – 2003，西安交通大学客座教授
　　2001 – 2002，香港理工大学特聘讲座教授
　　2002 – 2005，中国科学院海外评审委员会委员
　　2003－2006，中国科技部海外专家组委员
　　2004－至今，韩国机械与材料研究院，微细工厂计划，科学顾问
　　2007－至今，南非科技与技术部，先进生产技术计划，科学顾问
　　2008－至今，日本东京农工大学 客座教授

　　►荣誉奖励
　　1991，制造工程师学会杰出青年制造工程师奖
　　1994，被克林顿总统授予美国国家科学基金总统教授奖
　　1999，中国国家自然科学基金会海外杰出青年基金获得者
　　1999 – 2004, 中国教育部长江学者特聘、讲座教授
　　2000-2001，美国密西根大学杰出教职成就Robert M. Caddell奖
　　2001, 北美制造研究年会最佳论文奖
　　2002 美国密西根大学工学院杰出研究奖
　　2002，制造工程师学会Fellow
　　2002，国际设计与制造前沿会议最佳论文奖
　　2003，上海市政府海外科学家杰出贡献银质奖章
　　2004，美国机械工程学会Fellow
　　2004，国际设计与制造前沿会议最佳论文奖
　　2005，半导体研究协会最佳论文奖
　　2006 - 2011，美国密西根大学工程学院吴贤铭冠名教授
　　2006-2007， 美国密西根大学工学院杰出教育成就奖
　　2007，半导体研究协会最佳论文奖