研招网 > 北京研招网 > 清华大学 > 导师介绍

清华大学博士研究生导师简介:施惠基

姓  名:
施惠基
性别:
出生年月:
1950-12-0
工作单位:
清华大学
所在院系:
航天航空学院
职称:
教授
行政职务:
 
招生专业:
082500航空宇航科学与技术
研究领域:
航空航天结构与材料,计算力学与计算工程,先进的力学实验科学
是否兼职:
指导博士生总数:
 
指导硕士生总数:
 
目前博士生数:
 
目前硕士生数:
 
 
  个人简介
  个人简历:
  1950年12月生于杭州。82年北京理工大学工学学士, 86年核工业第二研究院工程师,89年法国梅斯大学硕士,92年法国洛林理工大学博士,93年法国矿业大学博士后。93-94年法国焊接研究院研究员,梅斯大学客座教授。95年后清华大学副教授,清华大学教授,责任教授,博士生导师,法国教育部教授资格和客座教授(97-03年),访问法国中央大学,里尔科技大学,矿业大学和贡比涅科技大学。
  目前主要研究方向:环境断裂-疲劳-蠕变力学,计算力学和计算工程,实验力学,接触力学,复合材料细观力学,生物力学。
  在高温材料热机械疲劳蠕变性能研究中,提出等效塑性应变能密度模型,引入温度交变作用参量,发展了时间相关和循环相关疲劳寿命预测技术,92年获法国梅斯科学院科学奖。
  航天和航空以及核工程结构的强度和稳定性数值计算模型和模拟技术的发展。复杂环境条件下材料和结构的力学性能研究,包括反应堆结构老化和剩余寿命评估以及反应堆安全评估;复合材料热机械加载基体-夹杂细观力学模型。
  接触预紧、接触磨损以及微动疲劳的研究;混合应力场中偏折裂纹扩展的规律和止裂技术;材料在动态高应变率状况时的力学性能和数值模拟。
 
 
  著作及论文
  成果及论著:
  1. H. J. Shi, C. Korn and G. Pluvinage?“High Temperature Isothermal and Thermal mechanical Fatigue on a Molybdenum - Based Alloy” International Journal of Materials Science and Engineering A247, 1998, pp.108-115.
  2. H. J. Shi, L. S. Niu and Z. G. Wang “Mixed Mode Fatigue Behavior under Inclined Loading Conditions for an Austenitic 304L Steel” Scripta Metallurgica et Materialia, Vol. 40, No. 2, 1999, pp. 153-158.
  3. H. J. Shi, S. L. Liu, Y. H. He and Z. X. Duan “Low Cycle Fatigue and Fatigue-Creep Behavior of a High Temperature Alloy on Notched Specimens”, Acta Metallurgica Sinica (English Letters), Vol. 12, No. 1, 1999, pp. 37-42.
  4. R. Ghfiri, H. J. Shi, R. Guo and G. Mesmacque “Effects of Expanded and Non-expanded Hole on the Delay of Arresting Crack Propagation for Aluminum Alloys ” Materials Science and Engineering A, Vol. A286,2000 pp.244-249.
  5. H. J. Shi, L. S. Niu, G. Mesmacque and Z. G. Wang “Branched Crack Growth Behavior of Mixed Mode Fatigue for an Austenitic 304L Steel”, International Journal of Fatigue, Vol. 22, 2000, pp. 457-465.
  6. Hui-Ji Shi, Li-sha Niu, C. Korn and Guy Pluvinage “High Temperature Fatigue Behaviour of TZM Molybdenum Alloy under Mechanical and Thermomechanical Cyclic Loads” Journal of Nuclear Materials Vol. 278, 2000, pp. 328-333.
  7. C. Y. Gao, H. J. Shi, C. H. Bai, Z. H. Yao “Measurement of Dynamic Fracture Parameters in the Expansion Process at High Strain Rate” Key Engineering Materials Vol. 18, (2000) pp. 277-282.
  8. L.S. Niu, H.J. Shi, C. Robin and G. Pluvinage “Elastic and Elastic-plastic Fields on Circular Rings Containing a V-Notch under Inclined Loads” Engineering Fracture Mechanics, Vol. 68, No.7, (2001), pp.949-962.
  9. L.S. Niu, L. Cheng, Q. Y. Hu and H.J. Shi “Analysis of Thermo-residual Stress in production on Fiber Reinforced Aluminum Matrix Composites” International Journal of Materials and Product Technology, SPM Vol. 1 (2001) pp.257-262
  10. H. M. Huang, H. J. Shi, Y. J. Yin “Multi-cracks problem for piezoelectric materials strip subjected to dynamic loading”. Mechanics Research Communications. Vol. 29(5) (2002), pp.413-424.
 
  承担项目
  近年主持完成国家自然科学基金项目3项,国家95技术攻关项目1项,部委科学基金项目4项。
  科研项目:
  国家重点基础研究规划项目(973)课题“多因素耦合作用下的材料损伤机制与物理数学模型”;中国-法国先进研究计划合作项目(PRA)“先进材料涂层界面力学性能和结构优化”,以及各向异性材料再结晶表面高温力学性能研究,复杂环境下材料细观力学性能研究,高性能航空发动机力学性能研究等。
考研帮最新资讯更多

考研帮地方站

你可能会关心:

查看目标大学的更多信息

分数线、报录比、招生简章
一个都不能错过

× 关闭